// SPDX-License-Identifier: UNLICENSED
// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router01.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router01 {
function factory() external pure returns (address);

function WETH() external pure returns (address);

function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);

function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);

function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);

function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);

function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);

function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);

function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);

function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);

function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);

function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);

function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);

function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);

function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}

// File: @uniswap/v2-periphery/contracts/interfaces/IUniswapV2Router02.sol

pragma solidity >=0.6.2;

interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);

function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);

function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;

function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;

function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}

// File: @uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);

function feeTo() external view returns (address);

function feeToSetter() external view returns (address);

function getPair(address tokenA, address tokenB)
external
view
returns (address pair);

function allPairs(uint256) external view returns (address pair);

function allPairsLength() external view returns (uint256);

function createPair(address tokenA, address tokenB)
external
returns (address pair);

function setFeeTo(address) external;

function setFeeToSetter(address) external;
}

// File: @openzeppelin/contracts/utils/Context.sol

pragma solidity ^0.8.0;

/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}

function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}

// File: @openzeppelin/contracts/access/Ownable.sol

pragma solidity ^0.8.0;

/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;

event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);

/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}

/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}

/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}

/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}

/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}

function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}

// File: @openzeppelin/contracts/utils/Address.sol

// OpenZeppelin Contracts v4.4.0 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.

uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}

/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html
* #use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);

(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}

/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?
* highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return functionCall(target, data, "Address: low-level call failed");
}

/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}

/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return
functionCallWithValue(
target,
data,
value,
"Address: low-level call with value failed"
);
}

/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}
* [`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(
address(this).balance >= value,
"Address: insufficient balance for call"
);
require(isContract(target), "Address: call to non-contract");

(bool success, bytes memory returndata) = target.call{value: value}(
data
);
return verifyCallResult(success, returndata, errorMessage);
}

/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data)
internal
view
returns (bytes memory)
{
return
functionStaticCall(
target,
data,
"Address: low-level static call failed"
);
}

/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");

(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}

/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data)
internal
returns (bytes memory)
{
return
functionDelegateCall(
target,
data,
"Address: low-level delegate call failed"
);
}

/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");

(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}

/**
* @dev Tool to verifies that a low level call was successful,
* and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly

assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}

// File: @openzeppelin/contracts/utils/math/SafeMath.sol

pragma solidity ^0.8.0;

// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.

/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
uint256 c = a b;
if (c < a) return (false, 0);
return (true, c);
}
}

/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}

/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}

/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}

/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}

/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's ` ` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a b;
}

/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}

/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}

/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}

/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}

/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}

/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}

/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol

pragma solidity ^0.8.0;

/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);

/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);

/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);

/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);

/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);

/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);

/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);

/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}

// File: GYLIE.sol

pragma solidity ^0.8.10;

contract GYLIEToken is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;

mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;

mapping(address => bool) private _isExcludedFromFee;

mapping(address => bool) private _isExcluded;
address[] private _excluded;

uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 50 * 10**9 * 10**9; // 50 billion Supply
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;

string private _name = "GYLIE";
string private _symbol = "GYLIE";
uint8 private _decimals = 9;

uint16 public _taxFee = 3;
uint16 private _previousTaxFee = _taxFee;

uint16 public _liquidityFee = 5;
uint16 private _previousLiquidityFee = _liquidityFee;

uint16 public _burnFee = 2;
uint16 private _previousBurnFee = _burnFee;

IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;


bool internal inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;

uint256 public _maxTxAmount = 5 * 10**7 * 10**9;
uint256 private numTokenToAddLiquidity = 2 * 10**6 * 10**9;
uint256 public maxWalletAmount = 5 * 10**8 * 10**9;

event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);

modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}

constructor() {
_rOwned[_msgSender()] = _rTotal;

IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x10ED43C718714eb63d5aA57B78B54704E256024E
); // pancakeswap router
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());

// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;

//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;

emit Transfer(address(0), _msgSender(), _tTotal);
_approve(address(this), address(uniswapV2Router), MAX);
}

function name() public view returns (string memory) {
return _name;
}

function symbol() public view returns (string memory) {
return _symbol;
}

function decimals() public view returns (uint8) {
return _decimals;
}

function totalSupply() public view override returns (uint256) {
return _tTotal;
}

function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}

function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}

function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}

function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}

function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}

function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}

function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}

function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}

function totalFees() public view returns (uint256) {
return _tFeeTotal;
}

function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(
!_isExcluded[sender],
"Excluded addresses cannot call this function"
);
(uint256 rAmount, , , , ) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}

function reflectionFromToken(uint256 tAmount, bool deductTransferFee)
public
view
returns (uint256)
{
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount, , , , ) = _getValues(tAmount);
return rAmount;
} else {
(, uint256 rTransferAmount, , , ) = _getValues(tAmount);
return rTransferAmount;
}
}

function tokenFromReflection(uint256 rAmount)
public
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}

function excludeFromReward(address account) public onlyOwner {
require(!_isExcluded[account], "Account is already excluded");
if (_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}

function includeInReward(address account) external onlyOwner {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i ) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}

function excludeFromFee(address account) external onlyOwner {
_isExcludedFromFee[account] = true;
}

function includeInFee(address account) external onlyOwner {
_isExcludedFromFee[account] = false;
}

function setTaxFeePercent(uint16 taxFee) external onlyOwner {
_taxFee = taxFee;
}

function setLiquidityFeePercent(uint16 liqFee) external onlyOwner {
_liquidityFee = liqFee;
}

function setBurnFeePercent(uint16 burnFee) external onlyOwner {
_burnFee = burnFee;
}

function setMinNumTokenToAddLiquidity(uint256 numTokens) external onlyOwner {
numTokenToAddLiquidity = numTokens;
}

function setMaxWallet(uint256 value) external onlyOwner {
maxWalletAmount = value * 10**9;
}

function updateRouter(address newAddress) external onlyOwner {
require(newAddress != address(uniswapV2Router), "TOKEN: The router already has that address");
uniswapV2Router = IUniswapV2Router02(newAddress);
address get_pair =
IUniswapV2Factory(uniswapV2Router.factory()).getPair(address(this),
uniswapV2Router.WETH());
if (get_pair == address(0)) {
uniswapV2Pair =
IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this),
uniswapV2Router.WETH());
} else {
uniswapV2Pair = get_pair;
}
}

function setMaxTxAmount(uint256 value) external onlyOwner {
_maxTxAmount = value * 10**9;
}

function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}


function claimStuckTokens(address _token) external onlyOwner {
if (_token == address(0x0)) {
payable(owner()).transfer(address(this).balance);
return;
}

IERC20 erc20token = IERC20(_token);
uint256 balance = erc20token.balanceOf(address(this));
erc20token.transfer(owner(), balance);
}

//to recieve ETH from uniswapV2Router when swaping
receive() external payable {
this;
}

function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}

function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(
uint256 tTransferAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn
) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(
tAmount,
tFee,
tLiquidity,
tBurn,
_getRate()
);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}

function _getTValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256
)
{
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tBurn = calculateBurnFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tBurn);
tTransferAmount = tTransferAmount.sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity, tBurn);
}

function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tLiquidity,
uint256 tBurn,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rBurn = tBurn.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rBurn).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}

function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}

function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i ) {
if (
_rOwned[_excluded[i]] > rSupply ||
_tOwned[_excluded[i]] > tSupply
) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}

function _takeBurn(uint256 tBurn) private {
uint256 currentRate = _getRate();
uint256 rBurn = tBurn.mul(currentRate);

_rOwned[address(0xdead)] = _rOwned[address(0xdead)].add(rBurn);
_tOwned[address(0xdead)] = _tOwned[address(0xdead)].add(tBurn);

if (tBurn > 0) {
emit Transfer(msg.sender, address(0xdead), tBurn);
}
}

function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(10**2);
}

function calculateLiquidityFee(uint256 _amount)
private
view
returns (uint256)
{
return _amount.mul(_liquidityFee).div(10**2);
}

function calculateBurnFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_burnFee).div(10**2);
}

function removeAllFee() private {
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_previousBurnFee = _burnFee;

_taxFee = 0;
_liquidityFee = 0;
_burnFee = 0;
}

function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
_burnFee = _previousBurnFee;
}

function isExcludedFromFee(address account) public view returns (bool) {
return _isExcludedFromFee[account];
}

function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");

_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}

function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
require(
amount <= _maxTxAmount,
"Transfer amount exceeds the maxTxAmount."
);
if (to != uniswapV2Pair) {
require(
balanceOf(to) amount <= maxWalletAmount,
"Balance exceeds limit"
);
}
}

// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));

if (contractTokenBalance >= _maxTxAmount) {
contractTokenBalance = _maxTxAmount;
}

bool overMinTokenBalance = contractTokenBalance >= numTokenToAddLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokenToAddLiquidity;

swapAndLiquify(contractTokenBalance);
}

//indicates if fee should be deducted from transfer
bool takeFee = true;

//if any account belongs to _isExcludedFromFee account or transfer is other than buy,sell then remove the fee
if (
_isExcludedFromFee[from] ||
_isExcludedFromFee[to] ||
(from != uniswapV2Pair && to != uniswapV2Pair)
) {
takeFee = false;
}

//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from, to, amount, takeFee);
}

function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);

// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;

// swap tokens for ETH
swapTokensForEth(half); // HATE swap when swap liquify is triggered

// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);

// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);

emit SwapAndLiquify(half, newBalance, otherHalf);
}

function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();

_approve(address(this), address(uniswapV2Router), tokenAmount);

// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}

function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);

// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}

//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();

if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
}

if (!takeFee) restoreAllFee();
}

function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeBurn(calculateBurnFee(tAmount));
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}

function _transferToExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeBurn(calculateBurnFee(tAmount));
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}

function _transferFromExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee
) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeBurn(calculateBurnFee(tAmount));
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}

function _transferBothExcluded(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee
) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeBurn(calculateBurnFee(tAmount));
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
}