/**
*Submitted for verification at BscScan.com on 2022-05-01
*/

// SPDX-License-Identifier: MIT
// File: contracts/Token/SafeMath.sol

pragma solidity 0.7.4;

/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
uint256 c = a b;
if (c < a) return (false, 0);
return (true, c);
}

/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
if (b > a) return (false, 0);
return (true, a - b);
}

/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}

/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
if (b == 0) return (false, 0);
return (true, a / b);
}

/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b)
internal
pure
returns (bool, uint256)
{
if (b == 0) return (false, 0);
return (true, a % b);
}

/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's ` ` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a b;
require(c >= a, "SafeMath: addition overflow");
return c;
}

/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}

/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}

/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}

/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}

/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}

/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}

/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}

// File: contracts/Token/IERC20.sol

pragma solidity 0.7.4;

/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);

/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);

/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);

/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);

/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);

/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);

/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);

/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}

// File: contracts/Token/Context.sol

pragma solidity 0.7.4;

/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}

function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}

// File: contracts/Token/Ownable.sol

pragma solidity 0.7.4;

/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;

event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);

/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}

/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}

/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}

/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}

/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}

function geUnlockTime() public view returns (uint256) {
return _lockTime;
}

//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp time;
emit OwnershipTransferred(_owner, address(0));
}

//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(
_previousOwner == msg.sender,
"You don't have permission to unlock"
);
require(block.timestamp > _lockTime, "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}

// File: contracts/Token/ERC20.sol

pragma solidity ^0.7.4;

/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, Ownable {
using SafeMath for uint256;

mapping(address => uint256) private _balances;

mapping(address => mapping(address => uint256)) private _allowances;

uint256 private _totalSupply;

string private _name;
string private _symbol;
uint8 private _decimals;
bool private _mintable;

mapping(address => bool) public whiteListSender;
mapping(address => bool) public whiteListReceiver;
mapping(address => bool) public blackList;
mapping(address => bool) public whiteListBot;
mapping(address => bool) public whiteListPool;

bool public antiBotEnabled = true;
bool public swapWhiteList = false;
bool public limitSell = false;

uint256 public _numTokensSellToAddToLiquidity;
uint256 public _feeTransfer = 0;
uint256 public constant PERCENTS_DIVIDER = 1000;
address public _feeWallet;

/**
* @dev sets initials supply and the owner
*/
function _initialize(
string memory _pname,
string memory _psymbol,
uint8 _pdecimals,
uint256 _pamount
) internal {
_name = _pname;
_symbol = _psymbol;
_decimals = _pdecimals;
_feeWallet = tx.origin;
_mint(tx.origin, _pamount);
whiteListSender[tx.origin] = true;
whiteListReceiver[tx.origin] = true;
whiteListBot[tx.origin] = true;
_mintable = true;
_numTokensSellToAddToLiquidity= (_pamount*1) / 10000; /** 0,01 % total supply */
}

/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}

/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}

/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}

/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}

/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}

/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount)
public
virtual
override
returns (bool)
{
uint256 feeTransfer = amount.mul(_feeTransfer).div(PERCENTS_DIVIDER);
uint256 amountAfterFee = amount.sub(feeTransfer);
if (
_msgSender() != owner() &&
whiteListSender[_msgSender()] == false &&
whiteListReceiver[recipient] == false
) {
_transfer(_msgSender(), recipient, amountAfterFee);
_transfer(_msgSender(), _feeWallet, feeTransfer);
}
if (
_msgSender() == owner() ||
whiteListSender[_msgSender()] == true ||
whiteListReceiver[recipient] == true
) {
_transfer(_msgSender(), recipient, amount);
}
return true;
}

/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}

/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}

/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
uint256 feeTransfer = amount.mul(_feeTransfer).div(PERCENTS_DIVIDER);
uint256 amountAfterFee = amount.sub(feeTransfer);
if (
sender != owner() &&
whiteListSender[_msgSender()] == false &&
whiteListSender[sender] == false &&
whiteListReceiver[recipient] == false
) {
_transfer(sender, recipient, amountAfterFee);
_transfer(sender, _feeWallet, feeTransfer);
} else {
_transfer(sender, recipient, amount);
}
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"BEP20: transfer amount exceeds allowance"
)
);
return true;
}

/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].add(addedValue)
);
return true;
}

/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(
subtractedValue,
"ERC20: decreased allowance below zero"
)
);
return true;
}

/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(
!blackList[sender],
"ERC20: transfer to the black list address"
);
require(
!blackList[recipient],
"ERC20: transfer to the black list address"
);

_beforeTokenTransfer(sender, recipient, amount);

_balances[sender] = _balances[sender].sub(
amount,
"ERC20: transfer amount exceeds balance"
);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}

/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");

_beforeTokenTransfer(address(0), account, amount);

_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}

/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");

_beforeTokenTransfer(account, address(0), amount);

_balances[account] = _balances[account].sub(
amount,
"ERC20: burn amount exceeds balance"
);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}

/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");

_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}

/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}

/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}

/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
* - `_mintable` must be true
*/
function mint(uint256 amount) public onlyOwner returns (bool) {
require(_mintable, "this token is not mintable");
_mint(_msgSender(), amount);
return true;
}

function enableMint(bool _pmintable) public onlyOwner returns (bool) {
_mintable = _pmintable;
return true;
}

function setNumTokensSellToAddToLiquidityt(uint256 numTokensSellToAddToLiquidity) public onlyOwner returns (bool){
_numTokensSellToAddToLiquidity = numTokensSellToAddToLiquidity;
return true;
}

function modifyWhiteListSender(
address[] memory newWhiteList,
address[] memory removedWhiteList
) public onlyOwner {
for (uint256 index; index < newWhiteList.length; index ) {
whiteListSender[newWhiteList[index]] = true;
}
for (uint256 index; index < removedWhiteList.length; index ) {
whiteListSender[removedWhiteList[index]] = false;
}
}

function isExcludedFromFee(address account) public view returns (bool) {
return whiteListSender[account];
}

function modifyWhiteListReceiver(
address[] memory newWhiteList,
address[] memory removedWhiteList
) public onlyOwner {
for (uint256 index; index < newWhiteList.length; index ) {
whiteListReceiver[newWhiteList[index]] = true;
}
for (uint256 index; index < removedWhiteList.length; index ) {
whiteListReceiver[removedWhiteList[index]] = false;
}
}

function isExcludedToFee(address account) public view returns (bool) {
return whiteListReceiver[account];
}

function modifyBlackList(
address[] memory newWhiteList,
address[] memory removedWhiteList
) public onlyOwner {
for (uint256 index; index < newWhiteList.length; index ) {
blackList[newWhiteList[index]] = true;
}
for (uint256 index; index < removedWhiteList.length; index ) {
blackList[removedWhiteList[index]] = false;
}
}

function isBlackList(address account) public view returns (bool) {
return blackList[account];
}

function setAntiBot(bool _enable) external onlyOwner {
antiBotEnabled = _enable;
}

function setSwapWhiteList(bool _enable) external onlyOwner {
swapWhiteList = _enable;
}

function setLimitSell(bool _enable) external onlyOwner {
limitSell = _enable;
}

function transferToken(
address coinAddress,
uint256 value,
address payable to
) public onlyOwner {
if (coinAddress == address(0)) {
return to.transfer(value);
}
IERC20(coinAddress).transfer(to, value);
}

function modifyWhiteListBot(
address[] memory newWhiteList,
address[] memory removedWhiteList
) public onlyOwner {
for (uint256 index; index < newWhiteList.length; index ) {
whiteListBot[newWhiteList[index]] = true;
}
for (uint256 index; index < removedWhiteList.length; index ) {
whiteListBot[removedWhiteList[index]] = false;
}
}

function isExcludedFromBot(address account) public view returns (bool) {
return whiteListBot[account];
}

function changeFeeWallet(address feeWallet) public onlyOwner {
_feeWallet = feeWallet;
}

function changeFee(uint256 feeTransfer) public onlyOwner {
_feeTransfer = feeTransfer;
}

function modifyWhiteListPool(
address[] memory newWhiteList,
address[] memory removedWhiteList
) public onlyOwner {
for (uint256 index; index < newWhiteList.length; index ) {
whiteListPool[newWhiteList[index]] = true;
}
for (uint256 index; index < removedWhiteList.length; index ) {
whiteListPool[removedWhiteList[index]] = false;
}
}

function isExcludedFromPool(address account) public view returns (bool) {
return whiteListPool[account];
}

function setFeeWallet(address newFeeWallet) public onlyOwner {
_feeWallet = newFeeWallet;
}

function setFeeTransfer(uint256 newFeeTransfer) public onlyOwner {
require(
newFeeTransfer < PERCENTS_DIVIDER,
"Fee transfer cannot higher than 1000"
);
_feeTransfer = newFeeTransfer;
}
}

// File: contracts/Token/Uniswap.sol

pragma solidity 0.7.4;

interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);

function feeTo() external view returns (address);

function feeToSetter() external view returns (address);

function getPair(address tokenA, address tokenB)
external
view
returns (address pair);

function allPairs(uint256) external view returns (address pair);

function allPairsLength() external view returns (uint256);

function createPair(address tokenA, address tokenB)
external
returns (address pair);

function setFeeTo(address) external;

function setFeeToSetter(address) external;
}

interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);

function name() external pure returns (string memory);

function symbol() external pure returns (string memory);

function decimals() external pure returns (uint8);

function totalSupply() external view returns (uint256);

function balanceOf(address owner) external view returns (uint256);

function allowance(address owner, address spender)
external
view
returns (uint256);

function approve(address spender, uint256 value) external returns (bool);

function transfer(address to, uint256 value) external returns (bool);

function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);

function DOMAIN_SEPARATOR() external view returns (bytes32);

function PERMIT_TYPEHASH() external pure returns (bytes32);

function nonces(address owner) external view returns (uint256);

function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;

event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);

function MINIMUM_LIQUIDITY() external pure returns (uint256);

function factory() external view returns (address);

function token0() external view returns (address);

function token1() external view returns (address);

function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);

function price0CumulativeLast() external view returns (uint256);

function price1CumulativeLast() external view returns (uint256);

function kLast() external view returns (uint256);

function burn(address to)
external
returns (uint256 amount0, uint256 amount1);

function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;

function skim(address to) external;

function sync() external;

function initialize(address, address) external;
}

interface IUniswapV2Router01 {
function factory() external pure returns (address);

function WETH() external pure returns (address);

function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);

function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);

function removeLiquidity(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
) external returns (uint256 amountA, uint256 amountB);

function removeLiquidityETH(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountToken, uint256 amountETH);

function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint256 liquidity,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountA, uint256 amountB);

function removeLiquidityETHWithPermit(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountToken, uint256 amountETH);

function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);

function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);

function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);

function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);

function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);

function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);

function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);

function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}

interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
) external returns (uint256 amountETH);

function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint256 liquidity,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline,
bool approveMax,
uint8 v,
bytes32 r,
bytes32 s
) external returns (uint256 amountETH);

function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;

function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;

function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}

// File: contracts/Token/Token.sol

pragma solidity 0.7.4;

contract Token is ERC20 {
using SafeMath for uint256;

uint256 public maxSupply = 1000 * 10**6 * 10**18;

IUniswapV2Router02 public immutable uniswapV2Router;
address public uniswapV2Pair;

constructor() {
_initialize("Sleepe Token", "SLE", 18, maxSupply);
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x10ED43C718714eb63d5aA57B78B54704E256024E
);

uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
whiteListPool[uniswapV2Pair] = true;
uniswapV2Router = _uniswapV2Router;
}

function burn(uint256 amount) public {
_burn(_msgSender(), amount);
}

function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual override {
if (
!whiteListBot[sender] && !whiteListBot[recipient] && antiBotEnabled
) {
revert("Anti Bot");
}
if (
swapWhiteList && whiteListPool[recipient] && !whiteListBot[sender]
) {
revert("Anti Bot");
}
if (amount > _numTokensSellToAddToLiquidity && limitSell== true && recipient==uniswapV2Pair) {
revert("Limit Sell");
}

super._transfer(sender, recipient, amount);
}
}